Babel Buster Pro V210 is the most intelligent connection yet between Modbus and SNMP v1 or v2c. The Pro V210 features an automatic table walker and flexible trap receiver that fully supports connecting Modbus to a UPS with an RFC 1628 MIB. Built-in Script Basic with SNMP enhancements provide even greater power and flexibility. The Pro V210 includes Modbus RTU and TCP, client and server. The Pro V210 includes SNMP client and server, and can send or receive traps. The Pro V210 also provides character string support for Modbus displays.
Modbus RTU, Modbus TCP
Modbus RTU RS-485 Master or Slave; Modbus TCP Client and Server; Modbus TCP over Ethernet 10/100BaseT; SNMP v1, v2c Get/Set access to all data points; SNMP v1, v2c table walker; SNMP v1, v2c trap receiver; SNMP v1, v2c trap generation, user programmable criteria; Up to 2000 local registers; Up to 500 MIB variables; 16, 32, 64-bit integer, 32 or 64-bit IEEE 754 floating point, Mod10; ASCII character string support (UTF-8); Supports Modbus "coils", input registers, holding registers; Modbus register mapping configured via web interface; Modbus (master) polling interval configurable per point; Configure via web pages; Programmable with Script Basic; SNMP enhancements added to Script Basic in Babel Buster Pro ; Flash file system, 10X capacity, for XML configuration files; Online help, Quick Help section at bottom of every web page; Password protection for web log-on and ftp; Field upgradeable firmware upload via ftp; DHCP or static IP address; Hardened EIA-485 transceiver for Modbus RTU; Optional RS-232 transceiver (in place of RS-485); Powered by 10-30VDC or 12-24VAC 50/60 Hz; Power Consumption: 0.1A @ 24VDC; DIN rail mounting, 100mm H x 70mm W x 60mm D; Pluggable screw terminal block for power & RTU network; Operating temperature -40?C to +85?C; Humidity 5% to 90%; FCC Class A, CE Mark; Listed to UL 916 and (Canadian) C22.2 No. 205-M1983.
See attached spec. sheet.