Back to Company Directory
P.O. Box 5638
Manchester, NH 03108-5638 USA
Description:DGH manufactures sensor-based data acquisition hardware for remote and distributed systems.
|Product Name||Type||Connectivity||Product Description|
|DIN-100 Series||I/O Module||Modbus||The DIN-100 Series Sensor to computer modules are a family of data acquisition modules that convert analog input signals to digital data and transmit via RS-485 to a controller which may be a computer or other processor-based equipment. The modules can measure temperature, pressure, voltage, current, digital input or digital output signals. The modules provide direct connection to a wide variety of sensors and perform all signal conditioning, scaling, linearization and conversion to either linearized ASCII data values or Modbus RTU data values.|
|D1000M single-channel data acquisition modules||SCADA Hardware||Modbus||The D1000M series modules convert an analog input signal to engineering units and transmit in ASCII format to any host with standard RS-485 or RS-232 ports. They use the Modbus RTU protocol for communication.|
|D5000M Four Analog Input Modules||SCADA Hardware||Modbus||Low-cost data acquisition modules that provide direct connection to four analog signals of the same type and range to any host with an RS-232 or RS-485 port. The modules provide direct connection to a wide variety of sensors and perform all signal conditioning, scaling, linearization and conversion to engineering units. The data values are transmitted to a host computer via RS-232 or RS-485 using either the DGH ASCII protocol or Modbus RTU binary protocol. The protocol is user-selectable.|